diff --git a/Haas_Gantry_BIDC/Bechtel SR.cps b/Haas_Gantry_BIDC/Bechtel SR.cps
index 5a4d50d..9d1cc96 100644
--- a/Haas_Gantry_BIDC/Bechtel SR.cps	
+++ b/Haas_Gantry_BIDC/Bechtel SR.cps	
@@ -314,7 +314,8 @@ var staticProperties = {
   useG73Retract: false,
   setting34: 1,
   useDPMFeeds: false,
-  singleResultsFile: true
+  singleResultsFile: true,
+  postVersion: "SRCG7A21"
 }
 
 var singleLineCoolant = false; // specifies to output multiple coolant codes in one line rather than in separate lines
@@ -791,28 +792,25 @@ function onOpen() {
       "O" + oFormat.format(programId) +
       conditional(programComment, " " + formatComment(programComment.substr(0, maximumLineLength - 2 - ("O" + oFormat.format(programId)).length - 1)))
     );
-    writeWords(writeComment(getGlobalParameter("username") + ": " + getGlobalParameter("document-path")), writeComment(getGlobalParameter("generated-at")));
-
+    writeComment("Career Account Username: " + getGlobalParameter("username"));
+    writeComment("Filename: " + getGlobalParameter("document-path"));
+    writeComment("Date: " + getGlobalParameter("generated-at"));
+    writeComment("Post Version: " + staticProperties.postVersion);
+  
     lastSubprogram = (initialSubprogramNumber - 1);
   } else {
     error(localize("Program name has not been specified."));
     return;
   }
-  
-  if (staticProperties.useG0) {
-    writeComment(localize("Using G0 which travels along dogleg path."));
-  } else {
-    writeComment(subst(localize("Using high feed G1 F%1 instead of G0."), feedFormat.format(highFeedrate)));
-  }
 
-  if (staticProperties.writeVersion) {
-    if ((typeof getHeaderVersion == "function") && getHeaderVersion()) {
-      writeComment(localize("post version") + ": " + getHeaderVersion());
-    }
-    if ((typeof getHeaderDate == "function") && getHeaderDate()) {
-      writeComment(localize("post modified") + ": " + getHeaderDate());
-    }
-  }
+  // if (staticProperties.writeVersion) {
+  //   if ((typeof getHeaderVersion == "function") && getHeaderVersion()) {
+  //     writeComment(localize("post version") + ": " + getHeaderVersion());
+  //   }
+  //   if ((typeof getHeaderDate == "function") && getHeaderDate()) {
+  //     writeComment(localize("post modified") + ": " + getHeaderDate());
+  //   }
+  // }
 
   // dump machine configuration
   var vendor = machineConfiguration.getVendor();
@@ -866,7 +864,7 @@ function onOpen() {
           comment += " - " + localize("ZMIN") + "=" + xyzFormat.format(zRanges[tool.number].getMinimum());
         }
         comment += " - " + getToolTypeName(tool.type);
-        writeComment(comment);
+        //writeComment(comment);
       }
     }
   }
@@ -1770,9 +1768,14 @@ function onSection() {
   } else {
     writeln("");
   }
+
+  if (hasParameter("notes") && getParameter("notes").toUpperCase().indexOf("APPROVED") <= -1) {
+    throw "Operation \"" + getParameter("operation-comment") + "\" not approved. See a Peer Mentor."
+  }
   
-  if (staticProperties.showNotes && hasParameter("notes")) {
+  if (staticProperties.showNotes) {
     var notes = getParameter("notes");
+    writeComment("PEER MENTOR NOTES:")
     if (notes) {
       var lines = String(notes).split("\n");
       var r1 = new RegExp("^[\\s]+", "g");
@@ -1869,7 +1872,7 @@ function onSection() {
     if (spindleSpeed > 99999) {
       warning(localize("Spindle speed exceeds maximum value."));
     }
-    skipBlock = !spindleChanged;
+    //skipBlock = !spindleChanged;
     writeBlock(
       sOutput.format(spindleSpeed), mFormat.format(tool.clockwise ? 3 : 4)
     );
diff --git a/Haas_Next_Generation/Bechtel DT.cps b/Haas_Next_Generation/Bechtel DT.cps
index 4e05e01..780af90 100644
--- a/Haas_Next_Generation/Bechtel DT.cps	
+++ b/Haas_Next_Generation/Bechtel DT.cps	
@@ -470,7 +470,7 @@ staticProperties = {
     coolantPressure: "",
     singleResultsFile: true,
     useP9995: true,
-    postVersion: 2893
+    postVersion: "DT1G7A21"
   };
 
   const HAAS_DRILL = 1;
@@ -1320,7 +1320,7 @@ function onOpen() {
       // 6/21/21 | Gavin Williams | will1742
       writeComment("Load and probe tools");
 
-      displayMedia("Net Share/Media/toolProbeReminder.jpg");
+      displayMedia("toolProbeReminder.jpg");
       writeBlock(mFormat.format(0));
 
       let parsedTools = [];
@@ -2390,7 +2390,7 @@ function onSection() {
   }
   
   if (hasParameter("notes") && getParameter("notes").toUpperCase().indexOf("APPROVED") <= -1) {
-    throw "Operation \"" + getParameter("operation-comment") + "\" not approved. See a TA."
+    throw "Operation \"" + getParameter("operation-comment") + "\" not approved. See a Peer Mentor."
   }
 
   if (staticProperties.showNotes) {
@@ -4500,7 +4500,7 @@ function onClose() {
   writeln("");
   writeComment("CLEAN MACHINE");
   writeRetract(Z);
-  gotoWithMessage(X_TRAVEL_LIMIT/2, 0, "airGunCLean.jpg");
+  gotoWithMessage(X_TRAVEL_LIMIT/2, 0, "airGunClean.jpg");
   displayMedia("floodCoolantOff.jpg")
   writeBlock(mFormat.format(0));
   setCoolant(COOLANT_FLOOD);
@@ -4510,7 +4510,7 @@ function onClose() {
   gotoWithMessage(X_TRAVEL_LIMIT, 0, "sprayUpperLeft.jpg")
   onCommand(COMMAND_COOLANT_OFF);
   onCommand(COMMAND_START_CHIP_TRANSPORT);
-  gotoWithMessage(X_TRAVEL_LIMIT/2, Y_TRAVEL_LIMIT, "useAuger.jpg");
+  gotoWithMessage(X_TRAVEL_LIMIT/2, Y_TRAVEL_LIMIT, "sweepChips.jpg");
   onCommand(COMMAND_STOP_CHIP_TRANSPORT);
 
   writeln("");
diff --git a/Haas_Next_Generation/Bechtel VF2.cps b/Haas_Next_Generation/Bechtel VF2.cps
index f7adca6..3464ff8 100644
--- a/Haas_Next_Generation/Bechtel VF2.cps	
+++ b/Haas_Next_Generation/Bechtel VF2.cps	
@@ -470,7 +470,7 @@ staticProperties = {
     coolantPressure: "",
     singleResultsFile: true,
     useP9995: true,
-    postVersion: 2893
+    postVersion: "VF2G7A21"
   };
 
   const HAAS_DRILL = 1;
@@ -1320,7 +1320,7 @@ function onOpen() {
       // 6/21/21 | Gavin Williams | will1742
       writeComment("Load and probe tools");
 
-      displayMedia("Net Share/Media/toolProbeReminder.jpg");
+      displayMedia("toolProbeReminder.jpg");
       writeBlock(mFormat.format(0));
 
       let parsedTools = [];
@@ -2390,7 +2390,7 @@ function onSection() {
   }
   
   if (hasParameter("notes") && getParameter("notes").toUpperCase().indexOf("APPROVED") <= -1) {
-    throw "Operation \"" + getParameter("operation-comment") + "\" not approved. See a TA."
+    throw "Operation \"" + getParameter("operation-comment") + "\" not approved. See a Peer Mentor."
   }
 
   if (staticProperties.showNotes) {
@@ -4500,7 +4500,7 @@ function onClose() {
   writeln("");
   writeComment("CLEAN MACHINE");
   writeRetract(Z);
-  gotoWithMessage(X_TRAVEL_LIMIT/2, 0, "airGunCLean.jpg");
+  gotoWithMessage(X_TRAVEL_LIMIT/2, 0, "airGunClean.jpg");
   displayMedia("floodCoolantOff.jpg")
   writeBlock(mFormat.format(0));
   setCoolant(COOLANT_FLOOD);
@@ -4510,7 +4510,7 @@ function onClose() {
   gotoWithMessage(X_TRAVEL_LIMIT, 0, "sprayUpperLeft.jpg")
   onCommand(COMMAND_COOLANT_OFF);
   onCommand(COMMAND_START_CHIP_TRANSPORT);
-  gotoWithMessage(X_TRAVEL_LIMIT/2, Y_TRAVEL_LIMIT, "useAuger.jpg");
+  gotoWithMessage(X_TRAVEL_LIMIT/2, Y_TRAVEL_LIMIT, "sweepChips.jpg");
   onCommand(COMMAND_STOP_CHIP_TRANSPORT);
 
   writeln("");
diff --git a/Haas_Next_Generation/Bechtel VF4.cps b/Haas_Next_Generation/Bechtel VF4.cps
index 7dbd9e8..c567de2 100644
--- a/Haas_Next_Generation/Bechtel VF4.cps	
+++ b/Haas_Next_Generation/Bechtel VF4.cps	
@@ -470,7 +470,7 @@ staticProperties = {
     coolantPressure: "",
     singleResultsFile: true,
     useP9995: true,
-    postVersion: 2893
+    postVersion: "VF4G7A21"
   };
 
   const HAAS_DRILL = 1;
@@ -1320,7 +1320,7 @@ function onOpen() {
       // 6/21/21 | Gavin Williams | will1742
       writeComment("Load and probe tools");
 
-      displayMedia("Net Share/Media/toolProbeReminder.jpg");
+      displayMedia("toolProbeReminder.jpg");
       writeBlock(mFormat.format(0));
 
       let parsedTools = [];
@@ -2390,7 +2390,7 @@ function onSection() {
   }
   
   if (hasParameter("notes") && getParameter("notes").toUpperCase().indexOf("APPROVED") <= -1) {
-    throw "Operation \"" + getParameter("operation-comment") + "\" not approved. See a TA."
+    throw "Operation \"" + getParameter("operation-comment") + "\" not approved. See a Peer Mentor."
   }
 
   if (staticProperties.showNotes) {
@@ -4500,7 +4500,7 @@ function onClose() {
   writeln("");
   writeComment("CLEAN MACHINE");
   writeRetract(Z);
-  gotoWithMessage(X_TRAVEL_LIMIT/2, 0, "airGunCLean.jpg");
+  gotoWithMessage(X_TRAVEL_LIMIT/2, 0, "airGunClean.jpg");
   displayMedia("floodCoolantOff.jpg")
   writeBlock(mFormat.format(0));
   setCoolant(COOLANT_FLOOD);
@@ -4510,7 +4510,7 @@ function onClose() {
   gotoWithMessage(X_TRAVEL_LIMIT, 0, "sprayUpperLeft.jpg")
   onCommand(COMMAND_COOLANT_OFF);
   onCommand(COMMAND_START_CHIP_TRANSPORT);
-  gotoWithMessage(X_TRAVEL_LIMIT/2, Y_TRAVEL_LIMIT, "useAuger.jpg");
+  gotoWithMessage(X_TRAVEL_LIMIT/2, Y_TRAVEL_LIMIT, "sweepChips.jpg");
   onCommand(COMMAND_STOP_CHIP_TRANSPORT);
 
   writeln("");