diff --git a/Haas_Next_Generation/1001.nc.failed b/Haas_Next_Generation/1001.nc.failed
deleted file mode 100644
index aa628b9..0000000
--- a/Haas_Next_Generation/1001.nc.failed
+++ /dev/null
@@ -1,26 +0,0 @@
-%
-O01001
-(will1742: 2D Ops v7~recovered)
-(Friday, July 16, 2021 8:01:13 PM)
-(Using G0 which travels along dogleg path.)
-(T1 D=2. CR=0.102 - ZMIN=1.515 - face mill)
-(T2 D=0.5 CR=0. - ZMIN=0.015 - flat end mill)
-(T3 D=0.4219 CR=0. TAPER=140deg - ZMIN=0.4182 - drill)
-(T4 D=0.25 CR=0. TAPER=45deg - ZMIN=0.425 - chamfer mill)
-(T5 D=0.25 CR=0. TAPER=140deg - ZMIN=0.815 - drill)
-(T6 D=0.25 CR=0. - ZMIN=0.815 - right hand tap)
-(T7 D=0.375 CR=0. TAPER=140deg - ZMIN=0.815 - spot drill)
-(T8 D=0.372 CR=0. - ZMIN=0.515 - thread mill)
-(T9 D=0.1875 CR=0. TAPER=118deg - ZMIN=0.815 - center drill)
-(T10 D=0.25 CR=0. - ZMIN=1.515 - flat end mill)
-(T11 D=0.5 CR=0.015 - ZMIN=0.535 - bullnose end mill)
-(T12 D=1.2598 CR=0.0312 - ZMIN=1.515 - face mill)
-(T13 D=0.84 CR=0.015 TAPER=60deg - ZMIN=1.515 - dovetail mill)
-(T14 D=0.25 CR=0.125 - ZMIN=0.515 - ball end mill)
-(T15 D=0.313 CR=0.1565 - ZMIN=1.015 - lollipop mill)
-(T17 D=1.9696 CR=0.0468 TAPER=45.5deg - ZMIN=1.515 - face mill)
-
-(Load and probe tools)
-N10 G0 G17 G40 G49 G80 G90 (Reset work plane, cancel all cycles and offsets)
-N15 M130 (Net Share/Media/toolProbeReminder.jpg)
-!Error: Failed to post data. See log for details.
diff --git a/Haas_Next_Generation/Bechtel VF4.cps b/Haas_Next_Generation/Bechtel VF4.cps
index 7a1b830..64fae14 100644
--- a/Haas_Next_Generation/Bechtel VF4.cps	
+++ b/Haas_Next_Generation/Bechtel VF4.cps	
@@ -614,7 +614,7 @@ var hasB = false;
 var hasC = false;
 var measureTool = false;
 var cycleReverse = false;
-probeMultipleFeatures = true;
+var probeMultipleFeatures = true;
 var maximumSpindleRPM = 15000;
 var homePositionCenter = false;
 
@@ -1357,9 +1357,6 @@ function onOpen() {
         defaultFill();
       }
 
-
-      writeln(parsedTools);
-
       for (var i = 0; i < tools.getNumberOfTools(); i++) {
         if (tool.bodyLength + tool.holderLength > MAX_TOOL_LENGTH) {
           throw "Error: T" + tool.number + " length greater than machine max"
@@ -2717,7 +2714,7 @@ function onSection() {
     displayMedia("Net Share/Media/checkDistance" + toolDistance.toPrecision(2).toString().replace(".", "_") + ".jpg");
     writeBlock(mFormat.format(0), formatComment("Open door"));
     //displayMedia("Net Share/Media/checkPrompt.jpg");
-    writeWords(mFormat.format(131), formatComment("End Multimedia"));
+    writeBlock(mFormat.format(131), formatComment("End Multimedia"));
 
     // asks user if measured height is accurate to displayed
     //var gotoRef = takeInput(("Is the tool " + toolDistance.toPrecision(3) + "in from the stock? [Y/N]"), ['N', 'Y']);