Skip to content

Commit

Permalink
Probing Alpha
Browse files Browse the repository at this point in the history
  • Loading branch information
@will1742
will1742 committed Aug 12, 2021
1 parent a6c893d commit 3a076e0
Showing 1 changed file with 79 additions and 37 deletions.
116 changes: 79 additions & 37 deletions Haas_Lathes_BIDC/haas st-20.cps
View file
Original file line number Diff line number Diff line change
Expand Up @@ -92,7 +92,7 @@ properties = {
description: "Use sequence numbers for each block of outputted code.",
group: 1,
type: "boolean",
value: false,
value: true,
scope: "post"
},
sequenceNumberStart: {
Expand All @@ -108,7 +108,7 @@ properties = {
description: "The amount by which the sequence number is incremented by in each block.",
group: 1,
type: "integer",
value: 1,
value: 5,
scope: "post"
},
optionalStop: {
Expand Down Expand Up @@ -157,7 +157,7 @@ properties = {
title: "Show notes",
description: "Writes operation notes as comments in the outputted code.",
type: "boolean",
value: true,
value: false,
scope: "post"
},
useCycles: {
Expand Down Expand Up @@ -421,6 +421,11 @@ var cAxisBrakeModal = createModal({}, mFormat);
var gExactStopModal = createModal({}, gFormat); // modal group for exact stop codes
var tailStockModal = createModal({}, mFormat);

var xOffset = createFormat({prefix:"X", decimals:(unit == MM ? 3 : 4), forceDecimal:true}); // diameter mode & IS SCALING POLAR COORDINATES
var zOffset = createFormat({prefix:"Z", decimals:(unit == MM ? 3 : 4), forceDecimal:true}); // diameter mode & IS SCALING POLAR COORDINATES
var rOffset = createFormat({prefix:"R", decimals:(unit == MM ? 3 : 4), forceDecimal:true}); // diameter mode & IS SCALING POLAR COORDINATES


// fixed settings
var firstFeedParameter = 100;
var usePolarCircular = false;
Expand Down Expand Up @@ -476,14 +481,38 @@ const BIDC_GEN_TURNING = 8;
const BIDC_BORING_TURNING = 9;
const BIDC_CUST_TURNING = 10;

const SOUTHWEST = 1;
const SOUTHEAST = 2;
const NORTHEAST = 3;
const NORTHWEST = 4;
const WEST = 5;
const SOUTH = 6
const EAST = 7;
const NORTH = 8;
const SOUTHWEST = {
num: 1,
name: "SOUTHWEST"
};
const SOUTHEAST = {
num: 2,
name: "SOUTHEAST"
};
const NORTHEAST = {
num: 3,
name: "NORTHEAST"
};
const NORTHWEST = {
num: 4,
name: "NORTHWEST"
};
const WEST = {
num: 5,
name: "WEST"
};
const SOUTH = {
num: 6,
name: "SOUTH"
};
const EAST = {
num: 7,
name: "EAST"
};
const NORTH = {
num: 8,
name: "NORTH"
};

const WHOLD = {
name: "Wedge Holder",
Expand Down Expand Up @@ -559,10 +588,10 @@ function getCompleteTool(holder, tool) {
}
this.offsetType = "Indexible Drilling";
this.x = function() {
return holder.x + tool.diameter*.15;
return holder.x + tool.diameter*.3;
};
this.z = function() {
return holder.z + (tool.getBodyLength() + tool.getHolderLength());
return holder.z + (tool.getBodyLength() + tool.getHolderLength() + holder.sOffset);
};
break;

Expand All @@ -579,7 +608,7 @@ function getCompleteTool(holder, tool) {
default:
this.offsetType = "General Turning"
this.x = function() {
return holder.x + tool.cuttingWidth*2;
return holder.x - tool.cuttingWidth*2;
};
this.z = function() {
return holder.z + (tool.holderOverallLength + holder.sOffset);
Expand Down Expand Up @@ -1126,17 +1155,25 @@ function getHaasProbingTypeBIDC(tool, internal, axial) {
function writeToolMeasureBlockBIDC(tool) {
var holder = getToolHolderBIDCST20(tool.number);
let measureTool = new getCompleteTool(holder, tool);
var probeType = getHaasProbingTypeBIDC(tool, measureTool.inner, measureTool.axial);
var compensationOffset = tool.isTurningTool() ? tool.compensationOffset : tool.lengthOffset;
if (compensationOffset > 99) {
error(localize("Compensation offset is out of range."));
return;
}

writeBlock(gFormat.format(10), "L10 P" + tool.number, xOffset.format(measureTool.x()));
writeBlock(gFormat.format(10), "L10 P" + tool.number, zOffset.format(measureTool.z()));
if(tool.noseRadius != 0 || tool.cornerRadius != 0) {
writeBlock(gFormat.format(10), "L10 P" + tool.number, rOffset.format(tool.cornerRadius != 0 ? tool.cornerRadius : tool.noseRadius));
}

writeln("DESC: " + tool.description);
writeln("HOLDER: " + holder.name);
writeln("OFFSET: " + measureTool.offsetType);
writeln("TOOL TYPE: " + getToolTypeName(tool.type));
writeln("Probe Type: " + probeType);
writeln("X:" + measureTool.x());
writeln("Z:" + measureTool.z());
writeBlock("T" + toolFormat.format(tool.number * 100 + compensationOffset % 100));
writeComment("PROBE: " + measureTool.offsetType + ", " + probeType.name);
writeBlock(mFormat.format(104));
writeBlock(gFormat.format(212), "H" + probeType.num);
writeBlock(mFormat.format(105));
writeln("");
}

Expand Down Expand Up @@ -1266,20 +1303,22 @@ function onOpen() {
}

var tools = getToolTable();
if (tools.getNumberOfTools() > 0) {
for (var i = 0; i < tools.getNumberOfTools(); ++i) {
var tool = tools.getTool(i);
var compensationOffset = tool.isTurningTool() ? tool.compensationOffset : tool.lengthOffset;
var comment = "T" + toolFormat.format(tool.number * 100 + compensationOffset % 100) + " " +
(tool.diameter != 0 ? "D=" + spatialFormat.format(tool.diameter) + " " : "") +
(tool.isTurningTool() ? localize("NR") + "=" + spatialFormat.format(tool.noseRadius) : localize("CR") + "=" + spatialFormat.format(tool.cornerRadius)) +
(tool.taperAngle > 0 && (tool.taperAngle < Math.PI) ? " " + localize("TAPER") + "=" + taperFormat.format(tool.taperAngle) + localize("deg") : "") +
(zRanges[tool.number] ? " - " + localize("ZMIN") + "=" + spatialFormat.format(zRanges[tool.number].getMinimum()) : "") +
" - " + localize(getToolTypeName(tool.type));
writeComment(comment);
}
writeln("");
}
// if (tools.getNumberOfTools() > 0) {
// for (var i = 0; i < tools.getNumberOfTools(); ++i) {
// var tool = tools.getTool(i);
// var compensationOffset = tool.isTurningTool() ? tool.compensationOffset : tool.lengthOffset;
// var comment = "T" + toolFormat.format(tool.number * 100 + compensationOffset % 100) + " " +
// (tool.diameter != 0 ? "D=" + spatialFormat.format(tool.diameter) + " " : "") +
// (tool.isTurningTool() ? localize("NR") + "=" + spatialFormat.format(tool.noseRadius) : localize("CR") + "=" + spatialFormat.format(tool.cornerRadius)) +
// (tool.taperAngle > 0 && (tool.taperAngle < Math.PI) ? " " + localize("TAPER") + "=" + taperFormat.format(tool.taperAngle) + localize("deg") : "") +
// (zRanges[tool.number] ? " - " + localize("ZMIN") + "=" + spatialFormat.format(zRanges[tool.number].getMinimum()) : "") +
// " - " + localize(getToolTypeName(tool.type));
// writeComment(comment);
// }
// writeln("");
// }

writeln("");

// will1742 | Gavin Williams | 8/10/21
// Auto probe tools
Expand All @@ -1288,9 +1327,12 @@ function onOpen() {
var tool = tools.getTool(i);
var compensationOffset = tool.isTurningTool() ? tool.compensationOffset : tool.lengthOffset;
var toolPosition = toolFormat.format(tool.number * 100 + compensationOffset % 100);
writeComment(tool.description);
writeBlock("T" + toolFormat.format((tool.number - 3) >= 1 ? tool.number - 3 : tool.number + 9), mFormat.format(6));
writeBlock(mFormat.format(0));
writeComment("LOAD TOOL " + tool.number);
writeToolMeasureBlockBIDC(tool);
}
writeln("");
}
}

Expand Down

0 comments on commit 3a076e0

Please sign in to comment.